Abstract
A novel heterojunction structure of cadmium telluride (CdTe)/zinc sulfide (ZnS)/zinc telluride (ZnTe) for thin-film solar cell (TFSC) applications was investigated numerically by Solar Cell Capacitance Simulator in One Dimension (SCAPS-1D). We made a comparative study on the performance of single-layer of Si/CdTe and multi-layers of Si/CdTe/ZnS/ZnTe structures. The optimum values for the thicknesses of CdTe absorber, ZnS, and ZnTe layers in the cell were found to be 2500, 40, and 80 nm, respectively. In the present work, the conversion efficiency (η) of 21.38% was obtained with open-circuit voltage, Voc = 1.01 V, short-circuit current density, Jsc = 29.32 mA cm−2, and fill-factor, FF = 72.06% in case of multi-layer structure with antireflection coatings (ARCs). The simulation results suggest that the ARC layers presented in this study would be effective to fabricate the high-efficiency solar cells.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
