Abstract
A simple multi-residue method was developed for detecting and quantifying 33 analytes from 13 classes of antibiotics (tetracyclines (3), quinolones (7), penicillins (3), ionophore coccidiostats (7), macrolides (3), sulfonamides (1), quinoxalines (2), phenicols (2), lincosamides (1), diaminopyrimidines (1), polypeptides (1), streptogramins (1) and pleuromutilins (1)) in animal feeds. Extraction and clean-up procedures were optimized with spiked piglet feed. Samples were extracted by ultrasonic-assisted extraction with a mixture of methanol/acetonitrile/McIlvaine buffer at pH 4.6 (37.5/37.5/25, v/v/v) containing 0.3% of EDTA-Na 2, followed by a clean up using a dispersive solid-phase extraction (d-SPE) with PSA (primary secondary amine). Detection of antibiotics was achieved by liquid chromatography-electrospray tandem mass spectrometry (LC–ESI-MS/MS) within 28 min using both positive and negative ESI mode. Average recoveries ranged from 51% (oxytetracycline) to 116% (tilmicosin) with associated relative standard deviations of 7.3% and 9.0% and an overall mean of 87%. Limits of quantification ranged from 3.8 ng g −1 (lincomycin) to 65.0 ng g −1 (bacitracin). Following optimization, the method was further verified for bovine and lamb feedingstuffs; negative matrix effects were evaluated and overcome by a standard addition method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.