Abstract
Traditional plug-flow anaerobic reactors (PFRs) are characterized by lacking a mixing system and operating at high total solid concentrations, which limits their applicability for several kinds of manures. This paper studies the performance of a novel modified PFR for the treatment of pig manure, characterized by having an internal sludge mixing system by biogas recirculation in the range of 0.270–0.336 m3 m−3 h−1. The influence on the methane yield of four operating parameters (recirculation rate, hydraulic retention time, organic loading rate, and total solids) was evaluated by running four modified PFRs at the pilot scale in mesophilic conditions. While the previous biodegradability of organic matter by biochemical methane potential tests were between 31% and 47% with a methane yield between 125 and 184 LCH4 kgVS−1, the PFRs showed a suitable performance with organic matter degradation between 25% and 51% and a methane yield of up to 374 LCH4 kgVS−1. Operational problems such as solid stratification, foaming, or scum generation were avoided.
Highlights
Anaerobic digestion (AD) is a biological process in which organic matter breaks down naturally in the absence of oxygen to produce biogas [1]
plug-flow anaerobic reactors (PFRs) is characterized by the fact that the flow or fluid through the reactor is orderly with no element of fluid overtaking or mixing with any other element ahead or behind [6]
The total solids (TS) (9.9–11.3% wet weight) and total Kjeldahl nitrogen (TKN) (6.0–6.8 gN kg−1 ) contents were almost constant among all experiments
Summary
Anaerobic digestion (AD) is a biological process in which organic matter breaks down naturally in the absence of oxygen to produce biogas [1]. The most common forms of large-scale anaerobic digesters are the continuously stirred tank reactor (CSTR) and plug-flow reactor (PFR) [2,3]. In a CSTR system, microorganisms are suspended in the digester through intermittent or continuous mixing, which offers good substrate–sludge contact with slight mass transfer resistance, but higher energy is required [4]. In an ideal CSTR, the concentration in any point of the reactor is identical. In an ideal PFR, there is no lengthwise mixing of the substrates under digestion as they move through the PFR. The concentration distribution is not uniform throughout the reactor [5]. PFR is characterized by the fact that the flow or fluid through the reactor is orderly with no element of fluid overtaking or mixing with any other element ahead or behind [6]. A PFR system is simple, economical [7], and attractive in terms of efficiency and overall bioconversion compared to CSTR [4]
Sign-in/Register to view highlights & summary 
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call