Abstract

ABSTRACT Due to its high melting point, tungsten carbide is perfect for mold-core usage during glass molding processes (GMP) such as those needed for manufacturing aspheric lenses. However, its extreme hardness makes it exceedingly difficult to machine. To overcome this problem, a BDD (boron-doped diamond) end-grinding-milling tool with dual-negative rake angle is designed and applied in this study to effectively mill a tungsten-carbide substrate. The first negative rake angle, with cutting edge across the tool’s centerline, prevents squashing during cutting between tool point and mold-core surface. This suppresses brittle fracturing by cutting material under pressure-cutting force in the machining area. Further, when preparing the cutting tool, micro w-EDM was used to create micro-protrusion abrasives on the plane of the first negative rake angle that feature a different second negative rake angle, providing pressure in all directions during material removal. This feature ensured cutting occurred under a non-tensile-stress regime, which avoided microcracks and subsurface damage. Experiments have shown that the developed end-grinding-milling tool was successful in creating micro-flutes and an aspheric lens mold-core array. Surface roughness was nano-scale and there were no burrs nor chipping along mold edges, indicating the designed BDD end-grinding-milling tool is good for grinding-milling of superhard materials.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call