Development of 16Cr8Ni low transformation temperature welding material for optimal characteristics under various dilutions due to all repair welding positions

Abstract

A new low transformation temperature (LTT) welding material 16Cr8Ni was developed to satisfy the optimal characteristics in diluted welds due to all repair welding positions. Its good weldability for all welding positions was tested. The measured Ms temperature of weld metals with different dilutions was between 150°C and 250°C which is the optimal range for compressive residual stress generation and fatigue life extension. The in-situ observation of phase evolution by the synchrotron-based X-ray diffraction technique validated the solidification mode of LTT welds for the prevention of solidification cracks. Moreover, the mechanical properties in the diluted LTT welds were measured by miniature uniaxial tensile tests. Large compressive residual stresses at the welded joints due to all welding positions were confirmed numerical analyses.