Development, calibration and validation of impact-specific cervical spine models: A novel approach using hybrid multibody and finite-element methods

Abstract

Background and Objective:Spinal cord injuries can have a severe impact on athletes’ or patients’ lives. High axial impact scenarios like tackling and scrummaging can cause hyperflexion and buckling of the cervical spine, which is often connected with bilateral facet dislocation. Typically, finite-element (FE) or musculoskeletal-models are applied to investigate these scenarios, however, they have the drawbacks of high computational cost and lack of soft tissue information, respectively. Moreover, material properties of the involved tissues are commonly tested in quasi-static conditions, which do not accurately capture the mechanical behavior during impact scenarios. Thus, the aim of this study was to develop, calibrate and validate an approach for the creation of impact-specific hybrid, rigid body - finite-element spine models for high-dynamic axial impact scenarios. Methods:Five porcine cervical spine models were used to replicate in-vitro experiments to calibrate stiffness and damping parameters of the intervertebral joints by matching the kinematics of the in-vitro with the in-silico experiments. Afterwards, a five-fold cross-validation was conducted. Additionally, the von Mises stress of the lumped FE-discs was investigated during impact. Results:The results of the calibration and validation of our hybrid approach agree well with the in-vitro experiments. The stress maps of the lumped FE-discs showed that the highest stress of the most superior lumped disc was located anterior while the remaining lumped discs had their maximum in the posterior portion. Conclusion:Our hybrid method demonstrated the importance of impact-specific modeling. Overall, our hybrid modeling approach enhances the possibilities of identifying spine injury mechanisms by facilitating dynamic, impact-specific computational models.