Development and Scale‐up of Aqueous Surfactant‐Assisted Extraction of Canola Oil for Use as Biodiesel Feedstock

Abstract

AbstractAqueous surfactant‐assisted extraction (ASE) has been proposed as an alternative to n‐hexane for extraction of vegetable oil; however, the use of inexpensive surfactants such as sodium dodecyl sulfate (SDS) and the effect of ASE on the quality of biodiesel from the oil are not well understood. Therefore, the effects on total oil extraction efficiency of surfactant concentration, extraction time, oilseed to liquid ratio and other parameters were evaluated using ASE with ground canola and SDS in aqueous solution. The highest total oil extraction efficiency was 80 %, and was achieved using 0.02 M SDS at 20 °C, solid–liquid ratio 1:10 (g:mL), 1,000 rpm stirring speed and 45 min contact time. Applying triple extraction with three stages reduced the amount of SDS solution needed by 50 %. The ASE method was scaled up to extract 300 g of ground canola using the best combination of extraction conditions as described above. The extracted oil from the scale‐up of the ASE method passed the recommendation for biodiesel feedstock quality with respect to water content, acid value and phosphorous content. Water content, kinematic viscosity, acid value and oxidative stability index of ASE biodiesel were within the ASTM D6751 biodiesel standards.