Abstract
Abstract The objective of this research is to develop a dehusked coconut grading machine for coconut cultivators and entrepreneurs. The basis of design is characterized by a tapered belt conveyor and sizing board with openings of increasing aperture which run along the edge of the belt conveyor. Dehusked coconuts are fed onto the tapered belt conveyor where the gravitational force pushes the nut towards the edge until it comes in contact with sizing board. Due to the tangential force, the nut reels along the sizing board, where dehusked coconuts are graded and allowed to fall through aperture according to their sizes. Performance tests indicated that the inclination angle and velocity of the belt significantly affected contamination ratio, grading efficiency and capacity at 5% significance level. The most efficient configuration for fully husked coconut and semi husked was a belt speed of 1.3 m/s with the inclination angle of 15° and belt speed of 1.5 m/s with the inclination angle of 15° respectively. The machine is acceptable by coconut growers and entrepreneurs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.