DEVELOPMENT AND JUSTIFICATION OF THE STRUCTURE OF ASSEMBLIES OF PYROLYSIS INSTALLATION FOR UTILIZATION OF MEDICAL WASTE

Abstract

When developing a pyrolysis plant for the disposal of medical waste, the evaluation criteria were ergonomics, operational reliability, simplicity and manufacturability of its manufacture, as well as maintainability. In certain operating conditions, given the high degree of epidemiological danger, ensuring the minimum degree of operator contact with the most medical waste is an urgent task. Therefore, the most effective solution in the development of a simple and operationally reliable pyrolysis plant for waste disposal, provided the use of a special robotic loading device and a furnace design for incinerating medical waste. The application of the above developments made it possible to efficiently for the environment, in an automated mode, dispose of medical waste with a minimum degree of operator contact with the most medical waste, as well as with minimal economic and technological disposal costs. The creation of a simpler, highly reliable and safe pyrolysis plant for the disposal of medical waste with a low cost of their manufacture, increased maintainability and a high environmental safety degree necessitates special design and theoretical calculations. Plants for the disposal of medical waste are distinguished by a special nature of work, which is the excessive creation of high temperatures, for the complete neutralization (oxidation) of hazardous chemical compounds contained in medical waste. Therefore, when developing the pyrolysis plant itself for the disposal of medical waste, one should take into account the temperature difference at the inlet and outlet of the furnace itself for incinerating medical waste. In the process of developing and justifying the design of the units of the new installation for the disposal of medical waste, the following tasks were solved: - development of a schematic diagram of the units of the facility for the disposal of medical waste, reflects the relationship between the operating and operational parameters of the facility itself; - design calculations for the units of the facility for the disposal of medical waste; - theoretical studies of the influence of the operating and operational parameters of the installation for the disposal of medical waste in the technological process of disposal of medical waste.