Development and assessment of vanadium-based metal–organic frameworks for the effective elimination of hazardous pesticides from aqueous solutions: Mechanism of uptake, adsorption capacities, rate of uptake, and enhancement via the Box-Behnken design

Abstract

Vanadium metal–organic frameworks (V-MOF) has a great potential to remove contaminants from water that come from agriculture wastewater methyl parathion (MP) pesticides with high effectiveness. Using a variety of methods, such as SEM, FT-IR, XPS), XRD, and BET analysis, the adsorbent was successfully synthesized and characterized. The dimensions of the pores measured at 1.33 nm correspond to the classification of micropores under the IUPAC system. Before the adsorption process, the material had a surface area of 1489.42 m2/g and a pore volume of 0.98 cc/g. After MP adsorption, the surface area, pore size, and pore volume decreased to 1268.42 m2/g, 1.12 nm, and 0.64 cc/g, respectively. Changes in the material’s physical properties indicate that the adsorption process had an effect. 7.2 was the result of controlling the point of zero charge through surface characterization. This information suggests that the surface of the adsorbent has a positive charge at pH below 7.2 and at the pH higher than this value the surface will have a negative charge. It was also looked into how pH affected the adsorption equilibrium. Although fitting to Langmuir isothermally, the kinetics of MP adsorption onto V-MOF are pseudo-second-order fitting. It is very probable that chemisorption was the mode of adsorption because the adsorption energy was 23.62 kJ.mol−1. The enthalpy (ΔHo) values obtained as a result of studying the thermodynamic parameters are positive, demonstrating that, within this temperature range, the pesticide adsorption process was endothermic., measuring 32.79 kJ.mol−1. Entropy (ΔSo) readings that are positive indicate that the system’s randomness increased during the adsorption process, reaching 119 J.mol−1K−1, and with rising temperatures, the negative of ΔGo rise. The effectiveness of the recommended adsorbent was evaluated by filtering wastewater samples in a laboratory environment. It is hypothesized that V-MOF and MP will interact by pore filling, π-π interaction, H-bonding, electrostatic contact, and other possible methods. Considering the specifics of this interaction in great detail is essential to comprehending the nature of adsorption and effectively constructing the adsorbent for use in real-world applications. Water filtering and the treatment of industrial effluents were made simple and effective by the use of V-MOF adsorbent technology. The results indicated that 383.6 mg/g was the maximal adsorption capacity at pH = 6. To evaluate the renewal of the adsorbent, more tests were carried out, and the outcomes showed that the renewal continued even after more than six cycles. The stability of the adsorbent during regeneration was confirmed by using XRD and FT-IR. The Box Behnken design (BBD) was then employed to optimize the adsorption outcomes.