Abstract
Gamma spectroscopy using HPGe is one of the most effective methods in determining the concentration of gamma emitting radionuclides in environmental samples. The purpose of this study is obtaining the efficiency calibration curves for the HPGe detector using MCNP5 Monte Carlo code, and designing appropriate software for correction of self-absorption caused by changes in density, height, and geometry of different samples. For this purpose the detector was simulated using MCNP5 Monte Carlo code, and the detector calibration curves were obtained for different geometries and heights, and appropriate software was designed for efficiency calibration. The results obtained in this study, show that changing the height, geometry, and density of the samples have significant effects on the detector efficiency because of the changes in self-absorption of the samples. Comparison of the self-absorption correction using the software, and the results of simulations show that designed software can predict the calibration curves for the new samples in different energies with error much less than 1%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.