Determining the heat of desorption for cassava products based on data measured by an automated gravimetric moisture sorption system.

Abstract

The isosteric heat of desorption is vital in evaluating the energy performance of food dryers. The isosteric heat of desorption was investigated for different cassava (Manihot esculenta Crantz) products prepared as flour or starch, with and without fermentation. An automated moisture sorption gravimetric analyser was used to measure the desorption isotherms over 10-90% relative humidity of the drying air at temperatures ranging from 25 to 65 °C. Analysis of variance showed an imperceptible contribution of the preparation method in the measured desorption data. This finding also agreed with microscopical images, which revealed the lack of compelling structural differences among different products. A set of empirical sorption equations suggested by the ASAE standard was examined over the measured desorption isotherms. The standard error of estimation was found to be in the acceptable range of 2.36-3.71%. Furthermore, the fulfilment of the enthalpy-entropy compensation theory was considered as an additional criterion in the thermodynamic results of different sorption equations, besides their fitting adequacy. The modified Chung-Pfost equation has proved to be the most suitable equation for cassava products, as it is capable of reflecting the temperature dependency of the isosteric heat of desorption. The net isosteric heat of desorption obtained was in the range of 540-1110 kJ kg-1 for 0.10kg kg-1 dry-basis moisture content and 52-108 kJ kg-1 for 0.25 kg kg-1 dry-basis moisture content. These findings are technologically relevant for optimising common drying technologies such as flash and flatbed dryers. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.