Abstract

<p>Water desorption isotherms of fermented cocoa beans from Ivory Coast were determined using the gravimetric static method of saturated salts solutions at 30 °C, 40 °C and 60 °C, and isosteric heats of desorption were calculated from Clausius-Clapeyron equation. The experimental data were fitted to several isotherm equations. The best fittings were obtained for the BET equation for aw<0.50 (with an average mean relative deviation (MRD) value of 1.56%) and for the Harkins-Jura equation for aw?0.50 (with an average value MRD equation of 4.17%). The isotherms obtained at 30 °C and 40 °C are practically coincident and overlapped for aw below 0.40. Fermented cocoa beans presented a monolayer moisture content of 0.083 dry basis (d.b.) at 30 °C and this value decreases with increasing temperature. The net isostheric heats of desorption for fermented cocoa beans for the temperature range studied (30-60 °C) were estimated as a function of moisture content. The maximum net isosteric heat of desorption for fermented cocoa beans was estimated at around 13.51 kJ/mol corresponding to a moisture content value of 2.85%. The energy requirement for maintaining the moisture content low of 8.7% (d.b.) or 8% wet basis (w.b.) for safe storage of this product or for reducing the moisture content during drying was estimated at around 9.58 kJ/mol.</p>

Highlights

  • Cocoa production is the main activity of smallholders

  • Fermented cocoa beans presented a monolayer moisture content of 0.083 dry basis (d.b.) at 30 °C and this value decreases with increasing temperature

  • The desorption isotherms reveal an increase in equilibrium moisture content with increasing water activity, at a constant temperature

Read more

Summary

Introduction

Cocoa production is the main activity of smallholders. They provide 95% of the world production on surfaces lower than 10 ha with a weak average yield estimated from 350 to 400 kg/ha cocoa beans (Barel, 2005). To maintain the stability of dried cocoa beans during storage, it is necessary to know product physical properties, in particular the relationship between water activity and equilibrium moisture content at room temperature and the relative humidity. This relationship is represented by product sorption isotherms. The effect of temperature on sorption isotherm is very important due to the fact that cocoa beans packaged in permeable jute bags are exposed to variable temperatures during storage and processing In another hand, water activity changes with temperature (Al Muhtaseb, McMinn, & Magee, 2002). Sorption isotherm is used in drying to determine the final moisture (Cassini, Marczak, & Norena, 2006; Noumi et al, 2004)

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call