Abstract
Effective temperatures of pulsed-laser-heated soot particles were derived from their thermal emission intensities using optical pyrometry in a laminar ethylene coflow diffusion flame. The present study concerns conditions of relatively low laser fluences under which soot particles are heated to temperatures below 3500 K to avoid complications of soot particle vaporization in both the experiment and the numerical calculations. The current nanoscale heat transfer model for laser-induced incandescence (LII) of soot was improved to account for the effect of the fractal structure of soot aggregates on the rate of heat loss to the surrounding gas. Mean primary soot particle diameter and mean aggregate size at the location of measurement were determined using the technique of thermophoretic sampling/transmission electron microscopy analysis. Numerical calculations based on the improved LII model were conducted to predict the soot particle temperature with known gas temperature, the heat conduction coefficient, the primary particle diameter, and the mean aggregate size, as well as values of assumed soot absorption function E(m) and the thermal accommodation coefficient of soot α. The experimentally observed soot temperature history, characterized by the peak value and the temporal decay rate, cannot be reproduced numerically using the values of E(m) and α found in the literature. By utilizing the experimental peak temperature and temporal decay rate new values of E(m) at 1064 nm and α were determined. Uncertainties in the derived values of E(m) and α caused by the uncertainty in the primary soot particle diameter and the mean aggregate size were analyzed. A novel method to determine the values of the soot absorption function E(m) and the thermal accommodation coefficient α was developed in the present study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.