Abstract

This rapid method for determining the degree of degradation of frying rapeseed oils uses Fourier-transform infrared (FTIR) spectroscopy combined with partial least-squares (PLS) regression. One hundred and fifty-six frying oil samples that degraded to different degrees by frying potatoes were scanned by an FTIR spectrometer using attenuated total reflectance (ATR). PLS regression with full cross validation was used for the prediction of acid value (AV) and total polar compounds (TPC) based on raw, first, and second derivative FTIR spectra (4000–650 cm−1). The precise calibration model based on the second derivative FTIR spectra shows that the coefficients of determination for calibration (R 2) and standard errors of cross validation (SECV) were 0.99 and 0.16 mg KOH/g and 0.98 and 1.17% for AV and TPC, respectively. The accuracy of the calibration model, tested using the validation set, yielded standard errors of prediction (SEP) of 0.16 mg KOH/g and 1.10% for AV and TPC, respectively. Therefore, the degradation of frying oils can be accurately measured using FTIR spectroscopy combined with PLS regression.

Highlights

  • The quality of fried foods is closely related to the quality of the frying oil [1]

  • Oil is subjected to prolonged periods of heating at high temperatures in the presence of air and water. This leads to a wide range of complex chemical reactions, such as thermal oxidation, hydrolysis, and polymerization [2, 3]

  • Several quality attributes are used to evaluate the quality of frying oil by traditional chemical methods, acid value (AV) or free fatty acids (FFA), total polar compounds (TPC), or total polar materials (TPM)

Read more

Summary

Introduction

The quality of fried foods is closely related to the quality of the frying oil [1]. Oil is subjected to prolonged periods of heating at high temperatures in the presence of air and water. This leads to a wide range of complex chemical reactions, such as thermal oxidation, hydrolysis, and polymerization [2, 3]. Controlling frying oil quality by a rapid evaluation method is imperative. Several quality attributes are used to evaluate the quality of frying oil by traditional chemical methods, acid value (AV) or free fatty acids (FFA), total polar compounds (TPC), or total polar materials (TPM). Physical methods, based on colorimetric reaction, refractive index, density, or viscosity [5, 8, 9], are relatively easy for measurement, but do not agree well with the chemical changes in frying oils during deep-fat frying

Objectives
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call