Abstract

Solvent extraction of thorium was studied using Taguchi method. The effect of various parameters such as acid types (sulfuric, nitric, hydrochloric, sulfuric ? nitric) and their concentrations from 0.001 to 4 M, initial thorium concentration (0.0001, 0.001, 0.01, 0.1 M) and solvent type (TBP, D2EHPA, Cyanex921, Cyanex272) in the ranges of 0.001 to 1 M on thorium extraction efficiency were investigated. The maximum extraction of thorium was obtained while 0.001 M hydrochloric acid, 0.001 or 0.01 M thorium and Cyanex272 were used. Under these optimum conditions, the extraction percent and distribution coefficient of thorium were 98.7% and 73.8, respectively. Compared with the hydrochloric aqueous solution, the nitric acid system showed less variation in the extraction of thorium. The proposed process has been applied for the separation of Th(IV), U(VI), La(III), and Ce(III) from synthetic solution same as thorium ores (monazite).

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.