Abstract
The present work proposes a method for the direct determination of Al, Cu, Cr, Fe and Ni in Brazilian carbonated soft drinks by electrothermal atomic absorption spectrometry (ETAAS). Samples of different flavors packed in containers made of different materials (polyterephthalate ethylene and glass bottles, and aluminum and steel cans) were analyzed. The method was optimized by building up pyrolysis and atomization curves in sample medium and by evaluating the calibration approach. Under optimized conditions, recoveries in the range of 92–104% were obtained in the evaluation of method accuracy. The limits of quantification for Al, Cu, Cr, Fe and Ni were 2.3, 0.93, 0.17, 0.90 and 1.2μgL−1, respectively. Also, the impact of the material used in the packaging and flavor on the concentrations of each metal in the samples was evaluated. It was proved that neither flavor nor packaging material affected the concentrations of Al and Fe in the samples. On the other hand, the packaging material influenced the concentration of Cu, Cr and Ni, and only the flavor affected the concentration of Cu in the samples. These conclusions were based on the data obtained from the application of a two-way ANOVA evaluation at 95% confidence level.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.