Abstract
Specifications in the Code of Federal Regulations limit the levels of As, Pb, and Hg in most certifiable color additives, and some have additional specification limits for Cr and Mn. A new ICP/MS method was developed and validated for the quantitative determination of these elements in various certifiable color additives. One dissolution and two microwave-assisted digestion sample preparation procedures were optimized to address initial low Hg and enhanced As recoveries. Results using the three sample preparation procedures were generally equivalent for all of the elements determined. LOQ values were 0.3 mg/kg for As, 0.7 mg/kg for Cr, 0.4 mg/kg for Pb, 0.7 mg/kg for Mn, and 0.1 mg/kg for Hg.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.