Abstract
This study attempted to establish a process that uses the ultrasonic wave transmission method to correlate the ultrasonic parameters with the material properties of Foamed Mixture Lightweight Soil (FMLS). The results were then applied for the defect detection of the FMLS embankment. First, the ultrasonic wave velocity (UPV) and amplitude (UPA) of FMLS with different mix proportions were collected continuously from 3rd day to 45th day in the curing age. The relationships between UPV versus FMLS elastic modulus, unconfined compressive strength, and density were calibrated. The variations in the ultrasonic parameters owing to the test distance and crack width were recorded. Then, the laboratory tests were reproduced through numerical simulation approach. Finally, the reliability and accuracy of the proposed detection method for FMLS were proved and validated through on-site tests. The proposed methodology, which is simple, stable, and reliable, was found to be suitable for the quality diagnosis of FMLS embankments after construction and during operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.