Abstract
Abstract. Detailed comparisons of airborne CH2O measurements acquired by tunable diode laser absorption spectroscopy with steady state box model calculations were carried out using data from the 2006 INTEX-B and MILARGO campaign in order to improve our understanding of hydrocarbon oxidation processing. This study includes comparisons over Mexico (including Mexico City), the Gulf of Mexico, parts of the continental United States near the Gulf coast, as well as the more remote Pacific Ocean, and focuses on comparisons in the boundary layer. Select previous comparisons in other campaigns have highlighted some locations in the boundary layer where steady state box models have tended to underpredict CH2O, suggesting that standard steady state modeling assumptions might be unsuitable under these conditions, and pointing to a possible role for unmeasured hydrocarbons and/or additional primary emission sources of CH2O. Employing an improved instrument, more detailed measurement-model comparisons with better temporal overlap, up-to-date measurement and model precision estimates, up-to-date rate constants, and additional modeling tools based on both Lagrangian and Master Chemical Mechanism (MCM) runs, we have explained much of the disagreement between observed and predicted CH2O as resulting from non-steady-state atmospheric conditions in the vicinity of large pollution sources, and have quantified the disagreement as a function of plume lifetime (processing time). We show that in the near field (within ~4 to 6 h of the source), steady-state models can either over-or-underestimate observations, depending on the predominant non-steady-state influence. In addition, we show that even far field processes (10–40 h) can be influenced by non-steady-state conditions which can be responsible for CH2O model underestimations by ~20%. At the longer processing times in the 10 to 40 h range during Mexico City outflow events, MCM model calculations, using assumptions about initial amounts of high-order NMHCs, further indicate the potential importance of CH2O produced from unmeasured and multi-generation hydrocarbon oxidation compounds, particularly methylglyoxal, 3-hydroxypropanal, and butan-3-one-al.
Highlights
Formaldehyde (CH2O) is an important and ubiquitous trace gas found throughout the atmosphere
The species responsible for this include: higher aldehydes like acetaldehyde and higher peroxides, which are produced in large amounts at the beginning of the run and decay away much more slowly than CH2O
A detailed investigation of CH2O measurements acquired by tunable diode laser absorption spectroscopy and steady state box model calculations using data from the INTEXB/MILAGRO campaign in 2006 reveals the presence of additional factors that must be taken into account when carrying out such comparisons in the boundary layer and/or within ∼2 days of very large emission sources such as those from megacities
Summary
Formaldehyde (CH2O) is an important and ubiquitous trace gas found throughout the atmosphere. The 5 lowest model non-boundary layer binned points spanning the 0 to 500 pptv range yield measurementmodel agreement to within 13 % (median radar altitudes are all above 3 km) and only 7 % of these comparisons www.atmos-chem-phys.net/11/11867/2011/
Published Version (Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have