Abstract
To enable the design of large capacity memory structures, novel memory technologies such as non-volatile memory (NVM) and novel fabrication approaches, e.g., 3D stacking and multi-level cell (MLC) design have been explored. The existing modeling tools, however, cover only a few memory technologies, technology nodes and fabrication approaches. We present DESTINY, a tool for modeling 2D/3D memories designed using SRAM, resistive RAM (ReRAM), spin transfer torque RAM (STT-RAM), phase change RAM (PCM) and embedded DRAM (eDRAM) and 2D memories designed using spin orbit torque RAM (SOT-RAM), domain wall memory (DWM) and Flash memory. In addition to single-level cell (SLC) designs for all of these memories, DESTINY also supports modeling MLC designs for NVMs. We have extensively validated DESTINY against commercial and research prototypes of these memories. DESTINY is very useful for performing design-space exploration across several dimensions, such as optimizing for a target (e.g., latency, area or energy-delay product) for a given memory technology, choosing the suitable memory technology or fabrication method (i.e., 2D v/s 3D) for a given optimization target, etc. We believe that DESTINY will boost studies of next-generation memory architectures used in systems ranging from mobile devices to extreme-scale supercomputers. The latest source-code of DESTINY is available from the following git repository: https://bitbucket.org/sparshmittal/destinyv2.
Highlights
As processor core-count rises and key applications become more data-intensive, the memory requirements of modern computing systems are growing tremendously
EDRAM, spin transfer torque RAM (STT-RAM), resistive RAM (ReRAM), phase change RAM (PCM), domain wall memory (DWM), spin orbit torque RAM (SOT-RAM) and (NAND) Flash memory have received significant attention in recent years [3]
For multi-level cell (MLC) designs, MLC modeling is done with specified MLC parameters in configuration
Summary
As processor core-count rises and key applications become more data-intensive, the memory requirements of modern computing systems are growing tremendously. To cater to these needs, modern processors are using large-sized memory structures, e.g., last level cache, main memory and storage. Intel’s 22 nm Haswell processor employs 128 MB eDRAM LLC (last level cache) [1], and the 22-nm Xeon E5-2600 processor has 45 MB SRAM LLC [2]. To address these challenges, researchers are exploring novel memory technologies, fabrication schemes and higher-density cell-designs. Since NVMs have a large resistance margin between set and reset states, MLC designs have been studied, which store multiple (e.g., two) bits in each cell to achieve higher density than the SLC designs
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
