Abstract
Planetary remote-sensing instruments are often required to cover a relatively large field of view, ideally with a uniform angular resolution over the field, due to relatively large apparent sizes of planetary targets at close proximities. They also have to comply with relatively tight mass and volume constraints. For these reasons, planetary x-ray telescopes in the past were mainly collimation-based x-ray spectrometers without focusing optics. Recent advances in x-ray optics technology now enable compact focusing x-ray telescopes suitable for planetary science (e.g., BepiColombo). We present two design options for compact Wolter-I x-ray optics for a SmallSat lunar mission concept—the CubeSat X-ray telescope (CubeX). The primary objectives of CubeX are to map surface elemental abundances of selected lunar impact craters and to assess the feasibility of millisecond x-ray pulsar timing navigation in realistic deep space navigation environments. The Miniature X-ray Optics (MiXO) in CubeX utilizes electroformed NiCo alloy replication (ENR) technology, which provides many advantages over micro-pore optics (MPO) employed in BepiColombo. We carry out extensive ray traces over a grid of mirror parameters and explore a novel tapered shaped design of tightly nested shells, where both shell length and focal-plane offsets vary with shell diameter. One of the two configurations is optimized for large effective areas at low energies, while the other for lower mass and high-energy response. We compare their performances with those of conventional designs through the spatial resolution and effective area estimated by ray traces.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.