Abstract

We have been developing silicon-on-insulator (SOI) pixel detectors with a pinned depleted diode (PDD) structure, named “XRPIX”, for X-ray astronomy. The PDD structure is formed in a thick p-type substrate, to which high negative voltage is applied to make it fully depleted. A pinned p-well is introduced at the backside of the insulator layer to reduce a dark current generation at the Si-SiO2 interface and to fix the back-gate voltage of the SOI transistors. An n-well is further introduced between the p-well and the substrate to make a potential barrier between them and suppress a leakage current. An optimization study on the n-well dopant concentration is necessary because a higher dopant concentration could result in a higher potential barrier but also in a larger sense-node capacitance leading to a lower spectroscopic performance, and vice versa. Based on a device simulation, we fabricated five candidate chips having different n-well dopant concentrations. We successfully found out the best n-well design, which suppressed a large leakage current and showed satisfactory X-ray spectroscopic performance. Too low and too high n-well dopant concentration chips showed a large leakage current and degraded X-ray spectroscopic performance, respectively. We also found that the dependency of X-ray spectroscopic performance on the n-well dopant concentration can be largely explained by the difference in sense-node capacitance.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call