Design of ultrahigh-Q silicon microring resonators based on free-form curves.

Abstract

A design method for ultrahigh-Q microring resonators (MRRs) based on Bezier free-form curves was proposed and demonstrated. An MRR consisting of a specially designed 180° waveguide bend, a directional coupler, and two low-loss multi-mode strip waveguides was designed. The free-form curves were used to increase the degree of freedom in the design, shaping the waveguide bend with a gradient width and curvature. This design effectively reduced the propagation loss caused by the roughness of waveguide sidewalls and the mode mismatch loss caused by the excitation of high order modes. The small effective radius of only 20µm enabled the MRR to have a large free spectral range (FSR) and a compact and flexible structure. The MRR was manufactured using a standard process provided by foundry and measured to have an ultrahigh loaded Q factor of 1.86 × 106 and a FSR of about 1 nm.