Abstract
Diffusion dialysis (DD) process utilizing anion exchange membranes (AEMs) is an environmentally-friendly and energy-efficient technology. From acidic wastewater, DD is needed for acid recovery. This research reports the development of a series of dense tropinium-functionalized AEMs via solution casting method. Fourier Infrared transform (FTIR) spectroscopy verified the successful preparation of AEMs. The developed AEMs exhibited a dense morphology, featuring 0.98–2.42 mmol/g of ion exchange capacity (IEC), 30–81% of water uptake (WR) and 7–32% of linear swelling ratio (LSR). They displayed exceptional mechanical, thermal and chemical stability and were employed for acid waste treatment from HCl/FeCl2 mixtures via DD process. AEMs possessed 20 to 59 (10−3 m/h) and 166 to 362 of acid diffusion dialysis coefficient (UH+) and separation factor (S) respectively at 25 °C. Compared to DF-120 commercial membrane (UH+ = 0.004 m/h, S = 24.3), their DD efficiency was improved under identical experimental conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
