Abstract
ABSTRACT The Compact thermal neutron imaging systems have become an important development trend. Compact thermal neutron imaging systems can use neutron tubes as neutron sources because of their low cost, small size, and portability. In order to achieve optimal imaging quality, the moderator and collimator in a neutron imaging system based on neutron tubes source are designed and simulated using SuperMC. The entrance position of the collimator is determined by analyzing the performance of different materials with their parameter’s optimization. It is suggested that a cylinder-shaped structure made of carbon, hydrogenous materials, and heavy metals can significantly increase the thermal neutron flux at the sample location. Further dimension optimization is carried out to improve the neutron beam collimation performance. A vertically divergent collimator with a divergence angle of 5° and an air gap is selected, along with the addition of a B4C lining material. According to the modelling results, the sample position can be as far away from the neutron source as 77 cm with a neutron source yield of 1.14 × 109 n/s. The collimation ratio is 29, the thermal neutron flux is 1.08 × 103 n/cm2·s, and n/γ is 1.44 × 1012 n/cm2·Sv, which is suitable for thermal neutron radiography.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
