Abstract

We design combinations of filters that lead to make outputs of multiple wavelength bands simultaneously. These bands are either 1) Infrared, RGB, Ultraviolet-3ranges 2) IR, Red, Green, Blue, UV-5ranges 3) IR+ Red, Green, Blue+UV-3ranges. Each is mostly devised by the arrangement of normal cold mirror, UV cold mirror, Philips(RGB) prism, UV filter and color filter. For the selection 1), UV cold mirror reflects UV and transmit VIS + IR. VIS and IR are sorted by normal cold mirror, which passes IR and reflects VIS. Each sorted light goes to each sensor to capture the images. The sorting of VIS and UV also can be done by UV filter. For the selection 2), have a same process in 1) but make VIS pass Philips(RGB) prism which sorts VIS into R, G, B. For the selection 3), the light passes green color filter first, Green color is only transmitted and the others are reflected. And then reflected light goes through UV cold mirror so that UV and Blue (wavelength <; 500nm) are reflected. And the others(wavelength>550nm, but green color zone was already sorted roughly wavelength>600nm) are transmitted, which is Red and IR. This sorting can be done by another design. After sorting all ranges by the selection 2), we can arrange UV goes a same pass with blue, and IR with red. We need band pass filters (in here, color filters) to revise the passes.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.