Design of Low Leakage PVT Variations Aware CMOS Bootstrapped Driver Circuit

Abstract

This paper describes a novel complementary metal oxide semiconductor (CMOS) bootstrapped driver circuit for driving large resistive capacitive (RC) loads. The proposed bootstrapped driver reduces the leakage as well as process, voltage and temperature (PVT) variations from the boosted nodes with higher switching speed. Very large scale integration (VLSI) designers need boosted output for the logic circuits which are operating in ultra-deep submicron regime under widespread use of low voltage. Proposed CMOS bootstrapped driver circuit is easy in design; built with minimum number of transistors and have high boosting efficiency with sharp output performance. Comparative evaluations with existing bootstrapped driver circuits are reported. Simulation results are derived by HSPICE tool with predictive technology model (PTM) bulk CMOS process fabrication at 32 nm technology node. The ability of large leakage reduction makes this driver superior as compared to active drivers. An average of 96.97% leakage current is saved at nominal ultra-low voltage of 0.15 V. Monte-Carlo analysis indicates that the proposed bootstrapped driver has less sensitivity of PVT variations. The power consumption and delay sensitivities are reduced by 10 × and 4.12 × as compared to conventional circuit.