Design of high-resolution digital-to-analog converter for 14-bit successive approximation analog-to-digital converter

Abstract

Digital to Analog Converter (DAC) is the essential block to convert an input digital signal into analog signal. The switching technique is the important parameter that will affect the performance of DAC where to ensure the analog output signal can be obtained without any missing code. The capacitor DAC is most famous architecture used to design the DAC and it produce high power efficiency. But, the number of unit capacitors in DAC increase exponentially due to the increasing of resolution and a DAC block occupies a largest area among many internal blocks in Successive Approximation Register (SAR) Analog to Digital Converter (ADC). The DAC was designed for 14-bit SAr ADC using a hybrid Rc DAC architecture. The design of DAC has been carried out by using 0.18μm CMOS Silterra process Technology. The simulation results are done with 3.3V voltage supply and obtained DNL within -0.39 LSB to 0.238 LSB. It occupies an area of 0.614μm2.