Abstract

In deep sub-micron technologies, conventional silicon-based transistors are faced main several problems related to the short-channel effects such as power dissipation, subthreshold leakage, and drain-induced barrier lowering (DIBL). Graphene nano-ribbon field-effect transistors (GNRFETs) have become a potential contender as a substitute for traditional silicon-based transistors in next generation nano-electronic devices. They exhibit fantastic properties such as high charge carrier mobility, mean free path of electrons, faster switching, and high ION/IOFF ratio. In order to prove the competences and superiority of these types of transistors, various circuits like full adder (FA) cells, which are the main building block of computational systems must be simulated and studied. This paper presents redesigning various 1-bit FA cells such as Complementary Metal-Oxide-Semiconductor (CMOS), Complementary Pass-Transistor Logic (CPL), Transmission-Gate (TG), Hybrid CMOS (HCMOS), and Transmission Function Adder (TFA) using MOS-GNRFET devices in 16nm technology node. Different HSPICE simulations are performed to obtain propagation delay, average power consumption, power-delay-product (PDP), and energy-delay-product (EDP) of FA cells and are compared with 16nm CMOS predictive technology model (PTM) at different supply voltages. The obtained results indicate that MOS-GNRFET based 1-bit FA cells have better performance than that of Si-CMOS one. The MOS-GNRFET based FA cells improve propagation delay and EDP at least 31.195% and 4.372%, respectively.

Highlights

  • Carbon-based nanomaterials are potential materials for generations of semiconductor technology due to their extraordinary properties such as high charge carrier mobility and long mean free path of electrons [1]

  • The Si-Complementary Metal-Oxide-Semiconductor (CMOS) based transistor sizing has been taken from [8, 9], and based on this sizing the number of graphene nanoribbons (GNRs) ( ) in MOS-Graphene nano-ribbon field-effect transistors (GNRFETs) has been selected to be equal to SiCMOS in terms of area

  • This paper presents the designing five various 1-bit full adder (FA) cells such as CMOS, Complementary Pass-Transistor Logic (CPL), TG, Hybrid CMOS (HCMOS), and Transmission Function Adder (TFA) using MOSGNRFET and Si-CMOS transistors

Read more

Summary

Introduction

Carbon-based nanomaterials are potential materials for generations of semiconductor technology due to their extraordinary properties such as high charge carrier mobility and long mean free path of electrons [1]. Graphene is a single atomic layer of carbon film with two-dimensional honeycomb lattice, has no intrinsic bandgap and cannot be completely turned ON or OFF [5]. With tailoring the graphene to one-dimensional (1-D) graphene nanoribbons (GNRs) form with width less than 10 nm, a bandgap opens up and can be used as channel material [6]. GNR field effect transistors (FETs) (GNRFETs) are potential substitution for silicon-based transistors due to faster switching, reduced short channel effects, lower energydelay product (EDP), and high ION/IOFF ratio [5, 7]

Methods
Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.