Abstract
In this paper high gain microstrip array antennas have been designed and analyzed for X band RADAR application. The array elements are excited by using inset feeding technique. Interestingly, all the array antennas are tuned exactly at centre operating frequency of 10 GHz. Rogers RT/duroid 5880™ having relative permittivity of 2.2 has been used as substrate for all the array antennas. The results show that the studied antenna array attained an operating band ranging from 9.77 GHz – 10.15 GHz with a bandwidth 380 MHz. It also revealed that the proposed 2×4 element array achieved a peak gain of 15.5 dB, a directivity of 15.82 dBi and a return loss of −30.27 dB. A beam steering of (θ,φ) = (16°, 0) with half power beam width (HPBW) of 16.88° is achieved using switched line phase shifter for 1×4 elements array antenna. Beam steering antenna shows return loss of −33.28 dB, very good VSWR of 1.04 and high bandwidth of 880 MHz. The ANSYS high frequency structural simulator (HFSS) has been used to perform all the simulations works. Contribution- A 2×4 elements microstrip array antenna and a 1×4 elements beam steering array antenna have been proposed for X band RADAR application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have