Abstract
A vacuum chamber (made up of stainless steel) and magnetron target (made up of copper) have been designed, manufactured and assembled. The sputtering target of pure copper make (dimensions 13 cm) involves cooling with (dimension 6.5 cm, with depth 3 cm) and it contains a circular magnet (6 x 3cm, an outer and inner diameter respectively). The chisel radius of target sputtering was about 9-11 cm. The systems have been tested with the pressure of 6x10 -5 mbar. The effective parameters of magnetron sputtering system operation have been collected including the pressure (75, 150, 300 and 450 mTorr), distance (3, 4, 5 and 6 cm) and voltage difference (218 to 310 Volt) between the target and the substrate. Finally, we have got maximum thickness on pressure point 300 mTorr, 3 cm distance and 220 Volt. An oxide copper thin film was deposited on different substrate including glass and optical the characteristics viz . optical energy gap, refractive index, extinction coefficient and real and imaginary dielectric constants were calculated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
