Design of bored piles in residual soils based on field-performance data

Abstract

The current practice for the design of large-diameter bored piles in residual soils in Singapore is based on the calculated static capacity of the piles. Insufficient consideration of the load-transfer mechanism and overreliance on pile load tests have led to conservative designs. A better alternative is to adopt a load–displacement analysis method that provides information on the load distribution along the pile and the complete load–displacement relationship. Results of full-scale load tests on instrumented piles indicate that bored piles in residual soils in Singapore behave in the same way as in stiff clay and weak rocks elsewhere in that the load transfer at the working load is dominated by shaft friction. Simple correlations exist between the standard penetration resistance and the load-transfer parameters. An example illustrates that the proposed design procedure that uses these simple correlations and the load-transfer method is an improvement over present design methods. Key words: bored piles, cast-in-place piles, design, drilled piers, field test, load transfer, residual soil, shaft resistance.