Abstract
This paper proposes an S/X-band single-layer shared-aperture array antenna for the multifunction radars of military ships. A unit cell of the proposed antenna consists of one S-band element and four X-band elements. The S- and X-band elements are printed on the same layer to prevent a blockage effect by upper elements in the stacked shared-aperture antenna. Herein, the S-band element has a mutual complementary configuration for the X-band elements. In addition, the unit cell of the proposed antenna is designed in a symmetrical structure, which can be flexibly extended to a full array configuration. To verify the antenna feasibility, antenna performances are measured in a full anechoic chamber. The fractional bandwidths of the S- and X-band elements are 13.6% and 13.4%, respectively. Moreover, in the 2 × 2 array configuration, the S-band array gain in the bore-sight direction varies from 5.4 dBi to 3.5 dBi when the main beam is steered from 0° to 45°. Under the same conditions, the measured X-band array gain in the bore-sight direction decreases from 13.4 dBi to 11.6 dBi.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
