Abstract
Advanced micro- or macro-systems are in some cases made with multilayer ceramic technology. Low-Temperature Co-fired Ceramic (LTCC) technology is considered as one of the more suitable technologies for the fabrication of ceramic micro-systems that integrate screen-printed, thick-film electronic components as well as three-dimensional buried structures, for example, cavities and channels. One of the applications is a ceramic combustor. The chemical energy of the fuel is converted into thermal energy in a chemical micro-combustor through a burning process, while the accompanying high temperatures and, frequently, high pressures impose harsh conditions on the combustor structure. Therefore, the combustor must be carefully designed not only from the functional, thermal and chemical points of view, but also with respect to the mechanical strength. The combustor device was prepared by laminating of Du Pont 951PX LTCC green tapes. The fabricated 3D LTCC structures with buried cavities and channels including two inlets (for fuel and air), the evaporator for the fuel, the mixing system of the channels (for mixing the evaporated fuel and air), the distribution channels and eight microburners were realized. The main parts are eight micro-burners realized as buried cavities. In the burners a platinum-based catalyst was deposited to assist the oxidation, i.e., the burning, of the methanol with the air. Thickfilm, platinum-based heaters and temperature sensors are incorporated within the structure. The device was tested with different flow rates of liquid methanol (1 ml/h to 5 ml/h) and air (7 l/h to 15 l/h). The obtained temperatures were between 250°C and 450°C.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call