Abstract
This paper describes the design for an experimental high power, phase-locked gyrotron oscillator. The electron beam is generated by a 1 MV pulseline accelerator, and the reference signal is provided by a 35 GHz, 20 kW magnetron. The expected output power is in the range 1 to 10 MW. The design is based on a solid 1 MeV, 100 Amp, 4 mm electron beam with a momentum pitch ratio ∞ of 0 · 75. The locking signal from the magnetron is introduced via a prebunching cavity. A second (passive) bunching cavity is used to increase the locking frequency bandwidth obtainable with a given locking power. The bunching cavities are designed to operate in the fundamental TE111 cylindrical cavity mode. Some competition from the TE112 higher order axial mode could not be avoided owing to the constraint on the minimum drift tube diameter set by the requirement to propagate the electron beam. The bunching cavities include two axial slots to control the cavity Q factor and suppress competing modes. Additional slots and apertures a...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have