Design of a 10.8 to 34.6 GHz Ultra‐Wideband Transparent Metamaterial Absorber Using an Equivalent Circuit Model

Abstract

AbstractIn this paper, an ultra‐wideband metamaterial absorber (UWMA) is proposed and demonstrated by using a transparent and flexible sandwich structure, which consists of a top patterned double‐square loop (DSL) of conductive film, the polymer interlayer, the bottom conductive film. The work presents the UWMA's equivalent circuit model for a macroscopic analysis of its physical mechanism. Further, optimizing UWMA's structural parameters using this equivalent circuit model can greatly enhance its efficiency. The absorption coefficient of the designed structure achieves over 90% within the wide frequency range from 10.82 to 34.59 GHz due to the overlapping of three absorption bands. The experimental results indicate that the absorption coefficient of the fabricated structure exceeds 60% in the frequency range of 10.45–35.28 GHz, and reaches 90% in the majority of frequency range of 10.71–28.51 GHz, while its averaged optical transparency in the visible spectrum exceeds 75%. The UWMA achieves high transparency due to a small ratio of the surface area occupied by the ITO pattern to the total area and realizes multiple‐resonance ultra‐wideband absorption with conformality while maintaining a thickness of only 2.2 mm, which has diverse applications in the field of electromagnetics, including aircraft stealth, transparent chambers, and flexible electronic screens.