Abstract
This paper introduces a robot vehicle designed for the same forward or reverse maneuver specifications. The vehicle has two two-wheel drives with a Double Ackermann Inverted (2WD-4WS-1A) steering method for Automatic Guide Vehicle (AGV). In the batch processing system industrial estate, AGV is used for transportation in the component warehouse area. In the steering system, Ackermann’s mechanics are described as optimizing the maximum maneuvering radius of the AGV, based on the turning center point. AGV drive is designed with four wheels, two drives and one steering mechanics. The vehicle’s mechanical steering system is designed with a system geometry analysis to control the turning radius of the vehicle. The Ackermann AGV steering method that has been implemented will be tested for its maneuvers. The results of the study were measured empirically to determine the efficiency and optimization of the system in the AGV design. The efficiency of steering control using only 1 steering wheel as 4 wheel control and small optimal radius on the AGV will increase maneuverability compared to using 2 WD.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
