Abstract
Prototype Fast Breeder Reactor (PFBR), a 500 MWe, (U-Pu)O2 fuelled, sodium cooled, pool type fast reactor, is in advanced stage of construction at Kalpakkam, India. Based on the experience gained during the design, manufacture and erection of various reactor components of PFBR, it is planned to construct Sodium cooled Fast Reactors (SFR) by adopting twin unit (2×500 MWe reactors) concept. The future Fast Breeder Reactor (FBR) – 1 & 2 have three main heat transport circuits, namely primary sodium, secondary sodium and steam-water systems. All the reactor internals including core and primary heat transport circuit systems are contained in a single vessel called main vessel and it is closed with top shield. Reactor assembly forms the heart of the Nuclear Steam Supply System. A detailed and exhaustive design / optimisation exercise was initiated towards improving the economic competitiveness and enhancing the safety of future FBRs. It is observed that the overall dimensions of the reactor assembly contribute immensely to the capital cost. In this context, detailed studies were carried out towards optimizing the overall dimensions of the reactor assembly. Further, the reactor assembly design in particular has been engineered to favour manufacture of integrated assembly and erection of the same, as a single unit, in reactor vault to reduce construction time. Various activities undertaken towards technology development of critical components have enhanced the confidence level in the improved design concepts and reducing time for manufacture and erection. In addition to the reactor assembly, specific improvements have been made in decay heat removal systems and sodium purification system. The layout incorporates a twin unit concept in which the ex-vessel fuel handling system and fuel storage building are shared. This paper discusses the basis for undertaking the review exercise and experience gained during construction of PFBR and highlights the design studies and technology development carried out for future SFR.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
