Design for assembly and disassembly for remanufacturing

Abstract

Purpose– This research aims to propose a methodology for a systematic, concurrent consideration of design for assembly (DFA) and disassembly guidelines and constraints for product remanufacturing. The methodology provides a holistic approach to design product from the remanufacturing perspective.Design/methodology/approach– The proposed methodology incorporates parts’ integration assessment and evaluation of part complexity and accessibility taking into consideration both DFA and design-for-disassembly (DFD) guidelines and constraints. Metrics for accessibility and complexity in retrieving the remanufacturable cores from a product are evaluated to determine the best possible disassembly route considering the practical constraints which an operator might face during disassembly. As there could be more than one feasible disassembly route to retrieve a core during remanufacturing, a disassembly evaluation is conducted to determine the optimal path after combination of the parts of the assembly.Findings– In remanufacturing, products need to be disassembled and re-assembled again. Conflicts exist between DFA and DFD. The proposed methodology serves to address these conflicting issues. The proposed methodology eases a designer’s effort systematically to incorporate both aspects, by incorporating practical consideration to determine an optimal disassembly sequence through integrating the handling aspect of assembly complexity assessment with the U-Rating disassembly effort indexing scheme to provide a quantitative evaluation of disassembly complexity, as disassembly still largely requires human effort.Research limitations/implications– Future research will explore methods to improve the user interface with features to determine feasible disassembly routes of a product automatically. This will relieve the effort of the product designer to a great extent.Originality/value– This paper proposes a methodology for a systematic, concurrent consideration of DFA and DFD to provide a holistic approach to product design from the remanufacturing perspective to ease the designer’s task. Practical considerations will be made to determine the optimal disassembly route of the product. DFD will only be required to be applied to the selected disassembly route to minimize conflicts with DFA.