Design, Fabrication and Characterization of 10kV/100A 4H-SiC PiN Power Rectifier

Abstract

A 10kV/100A SiC PiN rectifier with MRM-JTE (multiple-ring modulated junction termination extension) is designed, fabricated and characterized. The optimized MRM-JTE achieves high breakdown capability and extends the optimal JTE dose window. A 100μm thick epitaxial SiC PiN rectifier with a doping concentration of 5×1014cm−3 has been fabricated using a standard TZ-JTE process. A 5.4V forward voltage drop is obtained at 100A forward current. Moreover, a measured breakdown voltage is up to 13.5kV corresponding to about 96% of the ideal parallel plane junction. The fabricated device exhibits a low RON,SP of 3.76mΩ·cm2 at 200A/cm2 , and a high BFOM of 48.5GW/cm2. In addition, the C-V characteristic and reverse recovery switch characteristic are also analyzed. In this paper, the successfully fabrication of high-voltage SiC PiN rectifier provides a further development for high-voltage high-power SiC power modules.