Abstract

The FMPL-2 payload on board the 3Cat-5/A 6 Unit CubeSat, part of the FSSCat CubeSat mission, includes a dual L-Band Microwave Radiometer and a Global Navigation Satellite System Reflectometer, in one instrument, implemented in a Software Defined Radio. One of the design challenges of this payload was its Nadir looking Antenna, which had to be directive (> 12 dB), dual-band at 1400–1427 MHz and 1575.42 MHz, left-hand circularly polarized, and with important envelope restrictions, notably with a low profile. After a trade-off analysis, the best design solution appeared to be an array of six elements each of them being a stacked dual-band patch antenna, with diagonal feed to create the circular polarization, and a six to one stripline combiner. The design process of the elementary antennas first includes a theoretical analysis, to obtain the approximate dimensions. Then, by means of numerical simulations, prototyping, and adjusting the results in the simulations, the manufacturing errors and dielectric constant tolerances, to which patch antennas are very sensitive, can be characterized. A similar approach is taken with the combiner. This article includes the theoretical analysis, simulations, and prototype results, including the Flight Model assembly and characterization.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call