Abstract

The main function of China Fusion Engineering Test Reactor (CFETR) Divertor Dome is to isolate neutral particles and impurity particles as well as improve the ability of particle exclusion. For the CFETR Divertor Dome, a new integral hybrid divertor-blanket structure was proposed in previous study. The new Dome should also be compatible with the Remote handling (RH) requirements due to neutron activation of in-vessel components, thus special RH channels are designed on the front of the plasma-facing units (PFUs). Due to direct bombardment or sputtering of plasma, the Dome will suffer heat flux up to 10 MW/m2 and nuclear heat under 1.5 GW fusion power during steady-state operation, which puts forward critical and tricky requests for the design of cooling system. While for the RH channels, the situation is even direr due to its location and poor cooling conditions. In this paper, cooling system of the Dome is proposed, and cooling channels with special thermal transfer structure are designed in the PFUs to guarantee them with heat removal ability up to 10 MW/m2. Special PFUs and cooling system are designed to adapt to the RH, to shadow them from the direct bombardment of plasma and provide enough heat removal capability. Thermal-hydraulic analysis is carried out to verify the heat transfer ability of the Dome cooling system. The results will provide supports to the electromagnetic and structure analysis of Dome and promote the final design of CFETR water-cooled divertor.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call