Abstract
For all of the electronic modules in a liquid crystal display (LCD), the power consumption of data driver is only second to the backlight. Most of the power is used for converting the signal from digital to analog. In this paper, we proposed a new kind of pixel circuit with fully digital driving. As a result, the signal converting part in the conventional data driver can be omitted, and thus the power consumption can be greatly reduced. The proposed pixel circuit contains two thin-film transistors (TFTs) and a resistor in series, forming a discharging path for pixel voltage. There is also another transistor used to preset the pixel voltage. The gray level is controlled by the pulse width of the data source when the pixel is enabled by the scan voltage. The operation of the novel design is verified by simulation in the cases of a full high-definition panel. The proposed pixel circuit with the new driving method is an innovation approach to reduce data driver power consumption.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
