Abstract
Mode-locked lasers draw great interest in the laser research field due to their diverse applications and easy achievement of ultra-short and high-intensity optical pulse trains. Actively mode-locked (AML) fiber lasers are more flexible compared to passively mode-locked fiber lasers owing to their ability to control repetition rates and pulse intervals electronically. The design and development of wavelength tunable AML fiber lasers operating beyond the C-band have attracted great attention from the research community. In this paper, a repetition rate controllable and wavelength tunable L+U-band AML erbium fiber laser (AML-EFL) based on a single standard 1480 nm pump laser and Mach–Zehnder modulator (MZM) as an intra-cavity intensity modulator is demonstrated using numerical simulation. The AML-EFL is created using a MZM driven by electrical Gaussian pulses and a tunable optical bandpass filter that is used to tune the laser cavity at any wavelength in the 1565–1645 nm range. The repetition rate of the AML-EFL is controlled from 500 kHz to 1 GHz. Trains of pulses with pulse widths of 103 ns and 50 ps and pulse intervals of 2 µs and 1 ns are successfully generated at repetition rates of 500 kHz and 1 GHz, respectively. A pulse energy of 626 nJ is obtained for a 500 kHz repetition rate. Signal-to-noise ratios of 30 and 32 dB are observed for trains of mode-locked pulses with repetition rates of 500 kHz and 1 GHz, respectively. In addition, slope efficiencies of around 66% for an L-band wavelength of 1582.1 nm and 30% for a U-band wavelength of 1633.6 nm are obtained considering the optimized parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.