Design and Optimization of a New Hollow Circular Flexure Hinge for Precision Mechanisms

Abstract

Flexure hinges have been used in many precision mechanisms where repeatable, friction free motion and high precision are required. Many kinds of flexure profiles have been proposed during the past decade. This paper presents a new type of flexure hinge which combines circular longitudinal axis beams to form hollow joint. This novel design will help to improve the range of motion, reduce stress level and increase the maximum load before yielding. Due to its special design, the cavity inside the hinge can also be filled with an elastomeric filler material to provide vibration damping. In order to synthesis this hinge, shape optimization integrating genetic algorithm and response surface methodology is used. The optimization procedure is programmed in MATLAB whereas finite element analysis in ANSYS is also embedded into the codes to enhance the calculation process. The new flexure hollow hinge is compared to the conventional straight-axis solid hinges (circular, elliptical and corner-filleted flexure hinges) in terms of stiffness, rotational precision and stress levels. It is also supposed that this new design would increase the precision of the mechanism due to reducing the parasitic motion. Finite element analysis in ANSYS is used to verify for the viability of the design before it can be fabricated and tested.