Design and development of efficient and compact 20 kW 325MHz solid-state amplifier for superconducting accelerator applications.

Abstract

An efficient and compact, 20 kW solid-state power amplifier (SSA) at 325MHz has been designed and developed in-house, using single stage combining. It comprises of 24 nos. of 1 kW power amplifier (PA) modules, a 24-way Wilkinson power combiner and divider, and other peripheral systems. The typical gain and conversion efficiency of the PA modules at 1.0 kW output is 21.7 dB and 66.6%, respectively. It is demonstrated that overall power gain and AC to RF efficiency of this SSA at 20 kW is 88.5 dB and 54.8%, respectively, which matches closely with the design estimates. The harmonic content in the RF output is < -40 dBc for all the harmonics. The results of the Monte Carlo simulation are also presented, showing lower bound on combining efficiency with a degree of confidence if magnitude and phase data for 24 inputs are randomly chosen from a normal distribution's pre-defined interval. The salient features of this SSA include power density of 12.7 kW/m3, AC to RF efficiency of 54.8% at 20 kW, and guaranteed output of 20 kW with one failed PA module and 18.1 kW under two failed PA modules condition.