Abstract
The development of a piezoactuated flow-through microdispenser is described. The dispenser can be used for on-line sampling in a continuous-liquid-flow system. A major application area is rapid sample handling in chemical microsystems, e.g. automated high-throughput analysis or screening systems. The microdispenser is constructed of two joined silicon structures forming a flow-through channel. One channel wall couples the impulse movement of a piezoceramic element into the flow channel, generating a pressure pulse. Droplets (of typically 100 picolitres) are ejected from an orifice in the opposite channel wall. The sequential improvements of the dispenser over three generations are presented. The actuation voltage could be lowered from 150 V to approximately 50 V. The final version of the dispenser had an internal volume of 2.6 microlitres. The impact on droplet stability and directivity of introducing a protruding p-n etch-stop-defined nozzle and a means of matching surface properties to the dispensed liquid for improved performance are discussed. The maximum frequency for stable droplet formation was found to be approximately 500 Hz.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
