Design and Analysis of Gallium Arsenide-Based Nanowire Using Coupled Non-Equilibrium Green Function for RF Hybrid Applications

Abstract

This research work uses sp3d5s* tight-binding models to design and analyze the structural properties of group IV and III-V oriented, rectangular Silicon (Si) and Gallium Arsenide (GaAs) Nanowires (NWs). The electrical characteristics of the NWs, which are shielded with Lanthanum Oxide (La2O3) material and the orientation with z [001] using the Non-Equilibrium Green Function (NEGF) method, have been analyzed. The electrical characteristics and the parameters for the multi-gate nanowires have been realized. A nanowire comprises a heavily doped n+ donor source and drains doping and n-donor doping at the channel. The specified nanowire has a gate length and channel length of 15 nm each, a source-drain device length LSD = 35 nm, with La2O3 as 1 nm (gate dielectric oxide) each on the top and bottom of the core material (Si/GaAs). The Gate-All-Around (GAA) Si NW is superior with a high (ION/IOFF ratio) of 1.06 × 109, and a low leakage current, or OFF current (IOFF), of 3.84 × 10-14 A. The measured values of the mid-channel conduction band energy (Ec) and charge carrier density (ρ) at VG = VD = 0.5 V are -0.309 eV and 6.24 × 1023 C/cm3, respectively. The nanowires with hydrostatic strain have been determined by electrostatic integrity and increased mobility, making them a leading solution for upcoming technological nodes. The transverse dimensions of the rectangular nanowires with similar energy levels are realized and comparisons between Si and GaAs NWs have been performed.