Abstract
The need for homogeneous metal powder and binder mixing is paramount in injection moulding process as it affect product quality significantly. However available commercial feedstocks may not be suitable especially for production of micro parts with high aspect ratio. Therefore, this research proposes a new mixer design that incorporate mixing and granulation of the feedstock for components production at micro level. Also metal powder/ binder flow in the mixing chamber is investigated. The design specifications and simulation were based on powder loading, powder size and shape, binder formulation, sequence of material addition, mixing time, temperature and shear rate with finite element analysis. The simulation results show a favourable and visible design anticipation of the mixing mechanism and mixed feedstock. Conclusively development of this design will enhance micro metal moulding productivity and improve production cycle time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.